1.Palm kernel Cleaning: Cleaning is a series of operation to remove impurities in oil seeds.It is used for removing the iron impurities, stone, fiber and others. These impurities are bad for palm kernel oil extraction machines, especially for the palm kernel expeller.
2.Palm kernel crushing: Because the palm kernel is hard and big size, it is required to crash to smaller and even pieces.
3.Palm kernel and nuts shell separation. Both dry and wet separations are available. Wet separation is mostly used in palm kernel separating machine, on basis of difference of relative density of palm kernel and shell.
column separating machine
4.Palm kernel drying: Fresh kernel contains 20% moisture. While controling moisture drops below 7% by palm kernel drying machine, palm kernel has no mildew during transportation and storage.
palm kernel drying machine
5.Cooking section: It is used for heating and cooking the crashing materials, to make is suitable for palm oil mill plant , doing like this can help final user get the maximum oil and good quality cakes.
6.Palm kernel oil pressing. Palm kernel oil pressing production line is simple with usual oilseeds. The pre-pressing by palm kernel oil pressing machine can obtain 1/4 palm kernel oil, and residual oil need twice pressing.
palm kernel oil press machine
7.Palm kernel Filtering section: after pressing, there are some oil dregs in the crude oil, after clarifying, we need to filter the crude oil to avoid to jam the oil pipes during refining processes.
Note: Read more about Palm kernel oil mill plant
If you are interested in machine unsed in palm oil extraction, welcom to contact Henan Doing Mechanical Equipment Co.,ltd
Contact: Ms Sophia
Skype: sophia.zang1
Whatsapp: 0086 135 2662 7860
Phone: +86 135 2662 7860
Tel: +86 371 5677 1823
websit:www.doinggroup.com
